EITX-3001-2N13A1 - VIA EITX-3001-2N13A1 CPU Board with EITX-3001 with full cable kit

EITX-3001-2N13A1 - VIA EITX-3001-2N13A1 CPU Board with EITX-3001 with full cable kit...

Request Quote
For Price

Part Number:: EITX-3001-2N13A1
Model Number:: EITX-3001-2N13A1
Make:: VIA
Lead Time:: Available
Qty In Stock:: Available

VIA EITX-3001-2N13A1 CPU Board with EITX-3001 with full cable kit Simple Type: CPU Board

The VIA EITX-3001 combines the latest VIA Nano E-Series processor and the VIA VX855 media system processor to offer a full featured I/O specification on a specially developed slime-line board. Devices based on the EITX-3001 can be used to create thinner designs with a low profile system of less than 35mm high.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

Display interface: Supports one VGA, one 24-bit single channel LVDS, and one HDMI port
Dual-sided multiple I/O connector coastlines
Em-ITX form factor: 17cm (W)x 12 cm (L); low profile design
Fanless and ultra low power consumption
Five USB 2.0 host ports and one USB device port
Integrated VIA Chrome9 HCM, DX9 3D/2D graphics & video processor with MPEG-2, WMV9, VC1, and H.264 video decoding acceleration
One Gigabit Ethernet
Supports 5-wire/4-wire resistive touch interface connector
Two RS-232 and two RS-232/422/485
VIA Nano E processor (1MB L2 Cache)

Specifications

General

AT/ATX Selector: Onboard AT/ATX switch by a 3-pin headers
BIOS: AMI BIOS, 8MBit SPI Flash BIOS
Chipset: VIA VX855 Media System Processor chipset
Compact Flash: 1 x Onboard socket. Supports type I/II CompactFlash disk
Construction: Aluminum modeling
Controller: EETI ETP-CP-S5XU resistive touch panel controller
Controller: Integrated VIA Chrome 9 HCM DX9 3D/2D graphics & video processor, built-in Unified Video Decoding Accelerator, supports MPEG-2, WMV9/VC1, and H.264 video decoding acceleration.
Controller: VIA VT1708B High Definition Audio Codec Onboard TI TPA1517 6-W stereo Audio power amplifier
Controller: VIA VT6122 Gigabit Ethernet controller
CRT Interface: Onboard 1 x VGA connector as JVGA1 Supports CRT resolution up to 1920 x 1440
Digital I/O: 1 x 2 x6-pin header. Supports 8-bit GPIO, with 5VDC and 12VDC power source
Dimensions: (WxHxD) 230.45 mm x 34 mm x 124.8 mm
Display Memory: Optimized Unified Memory Architecture (UMA), Supports up to 512 MB frame buffer using system memory
Dual Independent Display: Supports CRT + LVDS , CRT + HDMI and LVDS + HDMI at same resolutions, same pixel depths, and same refresh rates
Front I/O Coastline: 1 x HDD & PWR LED, 2 x RS-232 / 422 / 485 as COM 1 and COM2, 1 x USB device port by a mini-DIN connector, 1 x 2-pole of Phoenix power input connector, 1 x ATX power on/off switch
Front Side Bus Speed: 800 MHz
Fuse Rating: 7 A / 125 V
HDD Activity LED: 1 x Red color LED
HDMI Interface: AD 9389B HDMI transmitter Onboard 1 x dual-link HDMI connector with flange as JHDMI
Input Voltage: Built-in onboard DC-to-DC converter, Accepts wide range of Power Input of DC 7V ~ 36V, Supports AT and ATX mode, defatult support ATX mode
Interface: 1 x 5-wire/4-wire resistive touch sensor interface by a 1 x 5pin header as TOUCH _R1
Interface: Supports 1 x RJ-45 connector, Supports Wake On LAN (WOL), Supports Preboot Execution Environment (PXE)
Interface: Supports Line-in, Speaker-out, Mic-in connectors by 3*3.5Ø audio jacks
Interval: Programmable 1~255 sec
Keyboard & Mouse: 1 x 2x5-pin header. Supports PS2 keyboard/mouse interface
L2 Cache: 1 MB
LVDS Interface: Supports 1 x 24-bit single-channel LVDS interface with inverter control signals by an onboard 2x15-pin wafer box connector as LVDS1 Panel resolution support up to WXGA (1366 x 768) Onboard 5V/3.3V LCD power switch (default at 3.3V)
Max. Capacity: Up to 2GB memory size
Onboard I/O Pin-headers: 2 of 2 x 5-pin headers for 2 x RS-232 as COM 3 and COM 4, 2 of 1 x 3-pin headers for 5V/12V selection of COM3 and COM4, 1 of SATA data connector 1 of 1 x 6-pin header for connection with VIA EMIO-1530 wireless LAN card,
Output: System reset
Power Input Connector: 1 x 2-pole Phoenix connector
Power Status LED: 1 x Green color LED
Processor: 1.3GHz VIA Nano E
Processor: VIA Nano E
Rear I/O Coastline: 1 x VGA connector, 1 x Dual-Link HDMI connector with flange as JHDMI, 4 x USB 2.0 host port by 2 pairs of double mini-DIN connector as USB1~USB4, 1 x RJ45 connector for Gigabit Ethernet connection as J1, 3 x 3.5Ø audio jacks as Mic-in Line-in, and Speaker-out
Serial ATA: JMicron JMH330 SATA controller, 1 x SATA II port, maximum data transfer rate up to 300MB/s, Onboard power connector output 5V support 2.5” SATA hard disk drive
Serial Ports: Fintek F81865 LPC I/O controller supports 4 x COM ports in: 2 x RS-232/422/485 by two DB-9 connectors as COM 1 and COM 2, configurable via BIOS setup. Supports RS-485 AutoFlow control functions of COM1 and COM2. 2 x RS-232 by two 2x5-pin headers as COM 3 and COM 4
System Power Management: Timers Power On, ACPI supported
Technology: 1 x DDR2 800/667/533 MHz 200-pin SDRAM SODIMM socket
Temperature Sensor: Built-in one Thermal Sensor by onboard 1x3-pin headers
USB Device Port: Supports 1 x USB device port by a mini-DIN connector
USB Host port: Supports 6 x USB 2.0 host ports in: 4 x USB 2.0 host ports by 2 pairs of double mini-DIN connector as USB1~USB4, Reserved 1 x USB 2.0 port by a 1 x 6-pin header with support of individual VCC power for connection with VIA EMIO-1530 Wireless LAN as JWLAN1

Applications

None Available

Aliases

None Available

VIA Industrial Partner